DAVIS Weather Echo/Echo Plus (7602, 7603) - Manual (Page 14)

Page 14 Weather Echo
To select the hemisphere:
1. Press the MODE key to change from Barometer to Hemisphere.
S ELECTING THE H EMISPHERE
2. Input a value of 0 for the Northern hemisphere and 1 for the Southern hemisphere
using the + or - key.
Note: If you do not specify a hemisphere, the default hemisphere is the Northern hemisphere. Hemi-
sphere is used in the weather forecasting feature of your display.
To calibrate the rain gauge:
1. Press the MODE key to change from Hemisphere to Rain.
2. Input a value of 100 if you have a 0.01” rain gauge.
3. Input 127 if you have a 0.2 mm metric rain gauge.
4. Input 10 if you have a 0.1” rain gauge.
C ALIBRATING THE R AIN G AUGE
Note: If you have a US model, the default display unit for rainfall is inches. If you have an OV model,
the default display unit for rainfall is millimeters. To change to a different display unit, see “To
display data in English or Metric units” page 10.
.
.
in
BAROMETER
N=0 S=1
Hemisphere
RAIN
Enter hemisphere here
. in
BAROMETER
N=0 S=1
Hemisphere
RAIN
Enter rain value here