DAVIS Weather Echo/Echo Plus (7602, 7603) - Manual (Page 10)

Page 10 Weather Echo
S ETTING UP THE W EATHER E CHO /W EATHER E CHO P LUS
Before you begin to read data from your display, you need to set up:
✦ The display preferences
✦ The current information
You also need to calibrate for barometric pressure and rainfall.
Setting up the Display Preferences
If you have a US model, the default display unit for rainfall is inches. If you
have an OV model, the default display unit for rainfall is millimeters.
To display data in English or Metric units:
✦ Press and hold down the SET key for 4 seconds in Mode 1.
All measurement units in all modes change to Metric.
✦ Press the SET key a second time to view wind speed in meters per second (m/s).
All measurement units in all modes remain in Metric.
✦ Press and hold down the SET key for 4 more seconds to return to English units.
M ETRIC S CREEN
To change the screen contrast:
✦ Hold the + button down to increase the screen brightness.
✦ Hold the - button down to decrease the screen brightness.
You can pick one of the following four screens to be your home screen:
✦ Outside humidity
✦ Inside humidity
✦ Windchill
✦ Dewpoint
To choose the home screen:
✦ Use the + and - buttons to cycle through the four screens.
The screen you leave visible becomes your home screen.
TEMPERATURE
BAROMETER
N
E W
S
¡
OUT IN
¡
.
RAIN TOTAL
.
¡
DEW POINT km/h
mm hPa
FORECAST