DAVIS WeatherLink for Alarm Output Add. - Manual (Page 8)

8
Advanced
Note: This description of this dialog box is valid for Streaming Data Utility versions 1.2.0 included with
WeatherLink 5.7.1 or later.
Delay on Release
Use this function in conjunction with the Alarm output and the Vantage
Pro alarms to determine how long to extend the activation time once it is
triggered. The default value is 10 minutes.
Delay on Reactivation
Use this function in conjunction with the Alarm output and the Vantage
Pro alarms to determine how long to delay the reactivation of an alarm
once it is inactive. The default value is zero.
Pulse Width
This function determines the pulse width for any of this selected output.
When Continuous Activation (see below) setting selected, this value is
zero. In the case of consecutive pulses, it also determines the time between
pulses. In most cases, there is no need to alter this value unless directed to
do so by the manufacturer of the electrical device you plan to connect to
the Alarm Output data logger.
Alarm Activation
This command determines whether an output for an activated alarm is con-
tinuous throughout the activation time or a one time pulse. The default is
continuous activation. Pulsed relay oriented devices will require the one-
time pulse.