DAVIS Vantage Pro ISS Fan-Aspirated Add., 2003 & later - Manual (Page 3)

Components Page 3
The hardware shown here is provided for assembly and mounting:
Additional Components on Vantage Pro Plus
Vantage Pro Plus includes an ultravio-
let (UV) sensor and a solar radiation
sensor. These two sensors are mounted
next to the rain collector on your ISS.
CAUTION: Do not to touch the small white dif-
fusers on top of the UV and solar
radiation sensors. Oil from the skin
reduces sensor sensitivity.
1/4" Flat Washers
1/4" Lock Washers
1/4" Hex Nuts
U-Bolts
Nut Plate
Sensor Suite SIM Housing
.05" Allen Wrench
1/4" x 3" Lag Screws
#4 x 1-1/8"
Machine Screw
#4 Tooth Lock Washer
#4 Flat Washer
#4-40 Hex Nut
1/4" x 1-1/2" Lag Screws
8" Cable Ties 4" Cable Tie
UV and
Solar
Radiation
Sensors
Sensor
Mounting
Shelf
Vantage Pro Plus ISS
ISS Fan Rev B.fm Page 3 Thursday, November 14, 2002 4:29 PM