Command – A&D ML-50 User Manual
Page 55
MS-70 / MX-50 / MF-50 / ML-50
53
In Case of Format included Temperature Data (Function Table 5-d 1 )
The first 3 figures are the temperature data.
The format consists of nineteen characters except the terminator.
In case of the MS-70
In case of the MX-50 or MF-50
In case of the ML-50
10.3. Command
The analyzer can be controlled by the following commands from the computer.
Add a terminator
( 0Dh、0Ah ) to each command.
Command Description
Q
Outputs the current data.
SIR
Outputs data continuously
C
Stops data output by SIR command.
QM
Outputs the data during measurement. (In other mode, QM can not use.)
START
Same as the
START
key
STOP
Same as the
STOP
key
RESET
Same as the
RESET
key
ENTER
Same as the
ENTER
key
SELECT
Same as the
SELECT
key
DOWN
Same as the
↓
key
UP
Same as the
↑
key
PROGRAM Same as the
PROGRAM
key
Header Moisture content
Unit
Terminator
160°C at sample pan
Header Moisture content
Unit
Terminator
160°C at sample pan
Header Moisture content
Unit
Terminator
160°C at sample pan