A&D ML-50 - Manual (Page 46)

44 MS-70 / MX-50 / MF-50 / ML-50
9. Connecting to a Printer
The analyzer can be connected to a compact dot-matrix printer (AD-8121B) using
the RS-232C interface. The results and record adapted to GLP, GMP and ISO can
be printed.
GLP: Good Laboratory Practice,
GMP: Good Manufacture Practice,
ISO: International Organization for Standardization
The statistical calculation data of the result and the graph data of the change of
moisture content per one minute can be printed using the function of the AD-8121B.
Use the AD-8121B accessory cable to connect them.
Setting List
Analyzer settings
Use
prt 5-d pU5e info
AD-8121B
settings
Dip switch
Result and easurement
program(Excluding
statistics calculation)
0 , 1 0 1 1 , 2
MODE 3
Dump printing
Result with statistical
calculation
0 , 1 0 0 , 1 0 MODE 1
Trace of change of
moisture content per
one minute
2 0 0 , 1 0
MODE 2
Interval
printing
Data for GLP, GMP and
ISO
0 , 1 , 2 0 0 1 , 2
MODE 3
Dump printing
Refer to "13. Function Table" to detail of settings.
Read the instruction manual of the printer.
Compact dot-matrix printer (AD-8121B)
Accessory cable
of AD-8121B
Connect to RS-232C
interface of the analyzer.