JKS OGS127 User Manual
Installation instructions, Welcome, Important

JKSOGS127
JKS Adjustable Track Bar Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Trackbar
Part Number: JKSOGS127
Welcome
CONGRATULATIONS on purchasing a new Adjust-
able Trackbar from JKS Manufacturing. We are com-
mitted to providing you with the best products avail-
able and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-
ly, and save them for future reference, as they contain
important installation and maintenance information.
Important
NOT COMPATIBLE WITH right hand drive ve-
hicles.
CHECK TORQUE SPECIFICATIONS regularly.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Flat Head Screwdriver
Tape Measure
1-1/2” Open-End Wrench
Heavy Duty Ratchet Strap *
Anti-Seize Lubricant
Hydraulic Press *
Wheel Bearing Grease
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description
A
Male Threaded (Axle) End
B
Female Threaded (Chassis) End
C
1” NF Jam Nut
D
Sleeve
E
Polyurethane Bushing
F
Sleeve
G
Polyurethane Bushing
H
Polyurethane Bushing
I
Polyurethane Bushing
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036