JKS OGS121 - Manual (Page 3)

JKSOGS121 JKS Adjustable Trackbar Installation Page 3
‰ 5. POST-INSTALLATION
 Take measurements again to ensure axle housing
is perfectly centered and make any final adjust-
ments if necessary.
IMPORTANT: The front axle housing must be in
perfect lateral alignment with vehicle chassis be-
fore you proceed with installation.
 Once all adjustments are complete, fully tighten
the Jam Nut (C) to prevent Adjustable Trackbar
length from changing. HINT: It may be easier
to tighten Jam Nut with the Adjustable Trackbar
removed from vehicle.
 Using a torque wrench, tighten mounting hardware
at both ends of track bar to 125 ft-lbs.
 A professional steering alignment should be
performed to correct toe position and to ensure ve-
hicle meets proper alignment specifications.
Maintenance
Check torque specifications regularly.
Regular cleaning with pressurized water is recom-
mended to maximize reliability.
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 10/31/2013