JKS 2942 - Manual (Page 3)

JKS2942 JKS Adjustable End Links Installation Page 3
 Using an appropriate cutting tool (such as a die
grinder with cutting wheel, or metal cutting saw),
carefully and squarely cut each end of the Con-
necting Rod (A) where previously marked.
 Now completely unthread both 1/2” Jam Nuts (B)
from Connecting Rod (A) and re-install. HINT: This
will help to repair any thread damage that may
have occurred during the cutting process.
‰ 4. SET FINAL LENGTH OF ADJUSTABLE
SWAYBAR LINKS
 Apply a drop of medium strength thread locking
compound to the tip of threads at each end of
Connecting Rod (A).
 Completely thread a Bushing Eyelet (C) on to each
end of Connecting Rod.
‰ 5. INSTALL SWAYBAR LINKS
 Apply a thin layer of wheel bearing grease to inner
surface and sides of Poly Bushings (D).
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 9/30/2013