Mounting options, Mounting options -48, Mounting – Avaya AP-6 User Manual
Page 78: Options
Additional Hardware Features
2-48 Avaya Wireless AP-4/5/6 User’s Guide
Mounting Options
There are three mounting options for the AP, described below.
Desktop Mount
This is the standard installation for the AP. See
instructions.
Wall Mount
Follow these steps to mount the AP on a wall:
1. Identify the location where you intend to mount the unit.
NOTE:
For best results, mount the unit vertically. In other words, the
antenna should be pointing up or down but not sideways.
2. Unplug the Access Point’s power supply, if necessary.
3. Use a Phillips screwdriver to remove the metal base from the
underside of the AP, if necessary.
4. Press down on the cable cover lock to release the cable cover.
See
for an illustration.
5. Remove the cable cover from the unit. See
for an illustration.