Avaya AP-6 - Manual (Page 65)

Initialization
Avaya Wireless AP-4/5/6 User’s Guide 2-35
WEP Encryption Place a check mark in the box
provided to enable WEP encryption.
See
WEP Encryption for more
information.
Set Encryption Key
1 If you enabled Encryption, configure
an Encryption Key. This key is used
to encrypt and decrypt data between
the AP and its wireless clients. Enter
the number of characters that
correspond to the desired key size,
as described below:
• Enter 10 hexadecimal
characters (0-9 and A-F) or 5
ASCII characters (see
ASCII
Character Chart ) to use 64-bit
encryption.
• Enter 26 hexadecimal
characters or 13 ASCII
characters to use 128-bit
encryption.
• Enter 32 hexadecimal
characters or 16 ASCII
characters to use 152-bit
encryption.
Option Description
4 of 4