Accessing the ap cli, Using hyperterminal to log in to the ap – Avaya AP-6 User Manual

Page 367

Accessing the AP CLI

Avaya Wireless AP-4/5/6 User’s Guide A-21

Accessing the AP CLI

You can use HyperTerminal or Telnet to access the AP CLI:

•

•

Using HyperTerminal to Log in to the AP

1. Open your terminal emulation program (like HyperTerminal) and

set the following connection properties:

— Com Port:

— Baud rate: 9600

— Data Bits: 8

— Stop bits: 1

— Flow Control: None

— Parity: None

This manual is related to the following products: