Avaya AP-6 - Manual (Page 126)

Interfaces
4-28 Avaya Wireless AP-4/5/6 User’s Guide
Dynamic Frequency Selection (DFS)
802.11a APs sold in Europe use a technique called Dynamic Frequency
Selection (DFS) to automatically select an operating channel. During
boot-up, the AP scans the available frequency and selects a channel that
is free of interference. If the AP subsequently detects interference on its
channel, it automatically reboots and selects another channel that is free
of interference.
RTS/CTS Medium
Reservation This parameter affects message flow control
and should not be changed under normal
circumstances. Range is 0 to 2347. When set
to a value between 0 and 2347, the
Access Point uses the RTS/CTS mechanism
for packets that are the specified size or
greater. When set to 2347 (the default
setting), RTS/CTS is disabled. See
RTS/CTS
Medium Reservation for more information.
Closed System Check this box to allow only clients
configured with the Access Point’s specific
Network Name to associate with the
Access Point. When enabled, a client
configured with the Network Name “ANY”
cannot connect to the AP. This option is
disabled by default.
Parameter Description
5 of 5