Avaya AP-6 - Manual (Page 439)

Syslog Commands
Avaya Wireless AP-4/5/6 User’s Guide A-93
NOTE:
The Heartbeat parameters are advanced settings not available via
the HTTP interface. When Heartbeat is enabled, the AP periodically
sends a message to the Syslog server to indicate that it is active.
The frequency with which the heartbeat message is sent depends
upon the setting of the Heartbeat Interval.
Syslog Lowest
Priority Logged Integer 1 – 7
1 = LOG_ALERT
2 = LOG_CRIT
3 = LOG_ERR
4 = LOG_
WARNING
5 = LOG_NOTICE
6 = LOG_INFO
(default)
7 = LOG_DEBUG
RW syslogpritolog
Heartbeat Status Integer enable (1)
disable (2)
(default)
RW sysloghbstatus
Heartbeat Interval
(seconds) Integer 1 – 604800
seconds;
900 sec. (default) RW sysloghbinterval
Name Type Values Access CLI Parameter
2 of 2