Avaya AP-6 - Manual (Page 457)

802.11b Wireless Interface Commands
Avaya Wireless AP-4/5/6 User’s Guide A-111
Syntax Examples
Network Name (SSID)
[Device-Name]> set wif netname for wireless interface>
[Device-Name]> show wif
For results of the
show wif
command, see Figure A-20 .
Operational Mode
[Device-Name]> set wif mode
TX Power Control
The TX Power Control feature lets the user configure the transmit power
level of the card in the AP at one of four levels:
Mode Operational Mode
1 dot11b-only
2 dot11g-only
3 dot11bg
4 dot11a-only
5 dot11g-wifi