Avaya AP-6 - Manual (Page 440)

Syslog Commands
A-94 Avaya Wireless AP-4/5/6 User’s Guide
Syslog Host Table Parameters
The table described below configures the Syslog hosts that will receive
message from the AP. You can configure up to ten Syslog hosts.
Syntax Examples
[Device-Name]> set syslogpriority <1-7 (default is 6)>
[Device-Name]> set syslogstatus
Name Type Values Access CLI Parameter
Syslog Host Table Table N/A R sysloghosttbl
Table Index Integer 1 – 10 N/A index
IP Address IpAddress User Defined RW ipaddr
Comment (optional) DisplayString User Defined RW cmt
Status (optional) Integer enable
disable
delete RW status