Avaya AP-6 - Manual (Page 388)

Auto Configuration Commands
A-42 Avaya Wireless AP-4/5/6 User’s Guide
Auto Configuration Parameters
These parameters relate to the Auto Configuration feature which allows
an AP to be automatically configured by downloading a specific
configuration file from a TFTP server during the boot up process.
Syntax Examples
[Device-Name]> set autoconfigstatus
[Device-Name]> set autoconfigfilename
Enter the filename of the configuration file that is used if the
AP is configured for Static IP.
[Device-Name]> set autoconfigTFTPaddr
Enter the TFTP server address that is used if the AP is
configured for Static IP.
Name Type Values Access CLI Parameter
Auto
Configuration Group N/A R autoconfig
Auto
Configuration
Status Integer enable (default)
disable RW autoconfigstatus
Auto Config
File Name DisplayString User Defined RW autoconfigfilename
Auto Config
TFTP Server IP
Address IpAddress User Defined RW autoconfigTFTPaddr