Equus 3160 - ABS/SRS + OBD2 Scan Tool - Manual (Page 9)

About the Scan Tool
ADJUSTMENTS AND SETTINGS
OBD2 7
ADJUSTMENTS AND SETTINGS
The OBD2 Scan Tool lets you make several adjustments and settings to
configure the Scan Tool for your particular needs. The following
adjustments and settings are available:
„ Adjust Brightness: Adjusts the brightness of the display screen.
„ DTC Library - Library of OBD2 DTC definitions.
„ Display Backlight: Turns the display backlight on and off.
„ Select Language: Sets the display language for the Scan Tool to
English, French or Spanish.
„ Unit of Measurement: Sets the Unit of Measurement for the Scan
Tool’s display to USA or metric.
Adjustments and settings can be made only when the Scan
Tool is NOT connected to a vehicle.
To enter the MENU Mode:
1.
With the Scan Tool “off”, press and hold
the UP button, then press and
release the POWER/LINK button.
„ The adjustments and setting MENU
displays.
2.
Release the UP
button.
DO NOT release the UP button until the adjustments and
settings MENU is visible on the display.
3.
Make adjustments and settings as described in the following
paragraphs.
Adjusting Display Brightness
1.
Use the UP
and DOWN buttons,
as necessary, to highlight Adjust
Brightness in the MENU, then press
the ENTER/LD
button.
„ The Adjust Brightness screen
displays.
„ The Brightness field shows the
current brightness setting, from 0 to
43.
2.
Press the UP
button to decrease the
brightness of the display (make the
display darker).