Additional tests, Obd2 59, Vehicle information – Equus 3160 - ABS/SRS + OBD2 Scan Tool User Manual
Page 61

Additional Tests
VEHICLE INFORMATION
OBD2 59
VEHICLE INFORMATION
The Vehicle Information function offers two options for retrieving
reference information for the vehicle under test; Vehicle ID and
Available Modules.
Retrieving Vehicle ID Information
The Vehicle ID function is applicable to model year 2000 and
newer OBD2-compliant vehicles.
The Scan Tool can retrieve a list of information (provided by the vehicle
manufacturer), unique to the vehicle under test, from the vehicle's on-
board computer. This information may include:
The vehicle's VIN number
The control module identification number
The vehicle's calibration ID(s). These IDs uniquely identify the
software version(s) for the vehicle's control module(s).
The Vehicle's Calibration Verification Number(s) (CVNs) required by
ODB2 regulations. CVNs are used to determine if emission-related
calibrations for the vehicle under test have been changed. One or
more CVNs may be returned by the vehicle's computer.
1.
From the “Mode Selection Menu”, use
the UP
and DOWN
buttons, as
necessary, to highlight Vehicle
Information, then press the ENTER/LD
button.
The “Vehicle Information Menu” dis-
plays.
If the Vehicle Information func-
tion is not supported by the vehicle
under test, an advisory message
shows on the Scan Tool’s display.
Press the ENTER/LD
button
to return to the Mode Selection
menu.
2.
Use the UP
and DOWN
buttons,
as necessary, to highlight Vehicle ID,
then press the ENTER/LD
button.
3.
A "One moment please..." message
displays while the requested information
is retrieved from the vehicle's computer.
The first time the Vehicle ID function is used, it may take
several minutes to retrieve the information from the vehicle's
computer.