Equus 3160 - ABS/SRS + OBD2 Scan Tool - Manual (Page 55)

Live Data Mode
LIVE DATA PLAYBACK
OBD2 53
„ If necessary, drive the vehicle until you reach the vehicle speed
at which the problem occurs.
8.
When the problem occurs, press and
release the ENTER/LD button.
„ All three LEDs will blink for three
seconds to indicate that Live Data is
being recorded, and a "One moment
please. . ." message shows on the
display.
„ When recording is complete, a confirmation screen displays,
asking if you would like to view the recorded data. Use the UP
and DOWN buttons, as necessary, to select Yes or No,
as desired, then press the ENTER/LD button.
If Yes is selected, the Scan Tool enters "Playback" mode from
which you can view a frame-by-frame playback of recorded
Live Data (see LIVE DATA PLAYBACK on page 53 for details).
If No is selected, the display returns to the "Live Data View"
mode.
9.
You can exit the "Record Live Data Mode" at any time by pressing
and holding the ENTER/LD button until the "Mode Selection
Menu" displays.
If desired, you can transfer the recorded Live Data information
to a personal computer using the optional PC-LINK program
(see instructions included with PC-Link for more information).
Important Information
1.
When Live Data capture is initiated, the green, yellow and red LEDs
on the Scan Tool will flash three times to indicate that Live Data is
being saved to the Scan Tool's memory.
2.
When you are LINKED to a vehicle and you are in the “Live Data
View mode”, you can toggle between “Live Data View” mode and
“DTC view” mode by alternately pressing and releasing the DTC
SCROLL
or the ENTER/LD buttons. The Scan Tool will
stay linked to the vehicle’s computer during this process. However, if
the DTC SCROLL
button is pressed twice the DTC screen will
be advanced to the next DTC screen and the Scan Tool will be
taken out of link.
LIVE DATA PLAYBACK
Once Live Data has been recorded, it is saved in the Scan Tool's
memory. You can view recorded Live Data immediately after recording
by selecting Yes from the Record Live Data confirmation screen (see
RECORDING (CAPTURING) LIVE DATA on page 49 for more
information), or you can view it later using the "Playback" function.