Equus 3160 - ABS/SRS + OBD2 Scan Tool - Manual (Page 35)

Using the Scan Tool
VIEWING ENHANCED DTCs
OBD2 33
„ The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
„ The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the
and buttons, as necessary, to view the
additional information.
„ The Scan Tool will display a code only
if codes are present in the vehicle’s
computer memory. If no codes are
present, a “No Enhanced DTC’s are
presently stored in the vehicle’s
computer” is displayed. Press the
ENTER/LD
button to return to the
Chrysler Enhanced menu.
3.
If more than one code was retrieved press the DTC SCROLL
button, as necessary, to display additional codes one at a time.
„ Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the LINK
button again.
4.
When the last retrieved DTC has been displayed and the DTC
SCROLL button is pressed, the Scan Tool returns to the
Chrysler Enhanced menu.
„ To view additional enhanced DTCs, repeat steps 1 through 4, above.
„ To exit the enhanced mode, use the UP and DOWN
buttons, as necessary, to select Exit from the Chrysler
Enhanced menu, then press the ENTER/LD
button. The
Scan Tool returns to the OBD2 DTC screen.
Ford/Mazda Enhanced DTCs
Mazda Enhanced DTCs are available for Mazda-branded
Ford vehicles only.