Status:questionable:calibration:enable, Status:questionable:calibration:event, Status:questionable:calibration:ntransition – Boonton 9240 RF Voltmeter User Manual
Page 80: Status:questionable:calibration:ptransition, Status:questionable:calibration:enable -30, Status:questionable:calibration:event? -30, Status:questionable:calibration:ntransition -30, Status:questionable:calibration:ptransition -30, Boonton 9240 series rf voltmeter, Remote operation 5-30
Boonton 9240 Series RF Voltmeter
STATus:QUEStionable:CALibration:ENABle
Description:
Sets or returns the Questionable Calibration Enable register, which contains the bit mask that
defines which true conditions in the Questionable Calibration Event register will be reported in the
Questionable Calibration Summary bit of the Questionable Condition register. If any bit is 1 in
the Questionable Calibration Enable register and its corresponding Questionable Calibration Event
bit is true, the Questionable Calibration summary bit will be set.
Syntax:
STATus:QUEStionable:CALibration:ENABle
Argument:
Returns:
16-bit register value (0 to 65535)
STATus:QUEStionable:CALibration:EVENt?
Description:
Returns the current contents of the Questionable Calibration Event register then resets the register
value to 0. The Questionable Calibration Event register contains the latched events from the
Questionable Calibration Condition register as specified by the Questionable Calibration status
group’s positive and negative transition filters.
Syntax:
STATus:QUEStionable:CALibration:EVENt?
Returns:
16-bit register value (0 to 65535)
STATus:QUEStionable:CALibration:NTRansition
Description:
Set or return the value of the negative transition filter bit mask for the Questionable Calibration
status group. Setting a bit in the negative transition filter causes a 1 to 0 (negative) transition in the
corresponding bit of the Questionable Calibration Condition register to cause a 1 to be written in
the associated bit of the Questionable Calibration Event register.
Syntax: STATus:QUEStionable:CALibration:NTRansition
Argument:
Returns:
16-bit register value (0 to 65535)
STATus:QUEStionable:CALibration:PTRansition
Description:
Set or return the value of the positive transition filter bit mask for the Questionable Calibration
status group. Setting a bit in the positive transition filter causes a 0 to 1 (positive) transition in the
corresponding bit of the Questionable Calibration Condition register to cause a 1 to be written in
the associated bit of the Questionable Calibration Event register.
Syntax:
STATus:QUEStionable:CALibration:PTRansition
Argument:
Returns:
16-bit register value (0 to 65535)
Remote Operation
5-30