Boonton 9240 RF Voltmeter - Manual (Page 21)

Boonton 9240 Series RF Voltmeter
Table 1-2 9240 Series Performance Specifications (continued)
EXTERNAL INTERFACES
Outputs
Front panel or optional Rear panel CAL OUT connector, 50 MHz, 100
mW max; rear panel recorder BNC connector, 9.09 kilohm impedance, 0
to 10 volts into 1 megohm (may be operated into 1 kilohm for 1V fs).
PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Case Dimensions:
8.26W x 3.48H x 13.5D inches (21.0 x 8.9 x 34.3 cm), Half-rack width, 2U
height
Weight:
5 lbs (2.3kg)
Power Requirements:
90 to 264 VAC, 47 to 63 Hz, (25VA) maximum.
Operating Temperature
2 : 0 to 55 °C
Storage Temperature
2 : -30 to +60 °C
Humidity
2 : 95% maximum, non-condensing
Altitude
2 : Operation up to 15,000 feet
Shock
2 : Withstands ±30G, in X, Y, and Z axes
Vibration
2 : Withstands 2G
( 2 as per MIL-PRF-28800F )
OTHER CHARACTERISTICS
Display:
Dot matrix 80 character LCD module (4 lines by 20 characters)
Keyboard:
11 Key conductive rubber
Processor:
32-bit Digital Signal Processor
Panel setup storage:
Can save and recall 10 complete “user” setups.
General Information
1-11