Boonton Power Sensor - Manual (Page 12)

Table 2-1. Diode and Thermal CW Sensor Characteristics (con't.)
Model
Frequency
Range
Dynamic
Range (1)
Overload
Rating
Maximum SWR Drift and Noise
@ 0 dBm Lowest Range
Impedance Peak Power Drift (typ.) Noise
RF Connector CW Power Frequency SWR 1 Hour RMS 2 σ
(dBm) (GHz) (typical)
WIDE DYNAMIC RANGE DUAL DIODE SENSORS
51085 500 kHz -30 to +20 1kW for 5µs to 4 1.15 2 uW 500 nW 1 uW
50
Ω
to 18 GHz (2) 5W to 12.4 1.20 (7,10)
N(M) (see notes below) to 18 1.25
51086 0.05 GHz -30 to +20 1 W for 1µs to 18 1.30 2 uW 300 nW 600 nW
50 Ω to 26.5 GHz (2) 2W to 26.5 1.35 (7,10)
K(M) (see notes below)
51087 0.05 GHz -30 to +20 1 W for 1µs to 18 1.30 2 uW 300 nW 600 nW
50
Ω to 40 GHz (2) 2W to 26.5 1.35 (7,10)
K(M) (see notes below) to 40 1.40
NOTES: For 51085 Peak Power - 1kW peak, 5µs pulse width, 0.25% duty cycle.
For 51085 CW Power - 5W (+37dBm) average to 25°C ambient temperature, derated linearly to 2W (+33dBm) at 85°C.
For 51086 CW Power - 2W (+33dBm) average to 20°C ambient temperature, derated linearly to 1W (+30dBm) at 85°C.
For 51087 CW Power - 2W (+33dBm) average to 20°C ambient temperature, derated linearly to 1W (+30dBm) at 85°C.
Power Sensor Manual 7