American Fibertek SM9p - Manual (Page 91)

83
3. Save the configuration.
Add Community Strings interface
Trap Managers
A trap manager is a management station that receives traps, the system alerts generated
by the switch. If no trap manager is defined, no traps will issue. Create a trap manager by
entering the IP address of the station and a community string. To define management
stations as trap manager and enter SNMP community strings and selects the SNMP
version.
1. Trap Manager IP: enter the IP address of trap manager.
2. Community Name: enter the community string.
3. Ver.: select the SNMP version type – v 1 or v2.
4. to save all configure