American Fibertek SM9p - Manual (Page 9)

1
Introduction
The product is a multi-port switch that can be used to build high-performance switched
indoor or protected outdoor networks. It provides wire-speed, Gigabit Ethernet switching
function that allows high-performance, low-cost connection. The Switch features a
store-and-forward switching and it can automatically learn and store source address in an
8K-entry MAC address table.
Features
 Nine ports of 10/100/1000BASE-T
 Two SFP 1000BASE-X transceiver slots
 IEEE802.3 10BASE-T, 802.3u 100BASE-TX, 802.3z Gigabit fiber and IEEE 802.3ab
1000Base-T
 IGMP snooping and Query mode support for Multi-Media application
 18Gbps switch fabric
 26.7Mpps throughput
 802.1p CoS, per port 4 queues
 IEEE802.3x Flow control
 Flow control for full duplex
 Back pressure for half duplex
 Port Based VLAN /802 .1Q VLAN
 IEEE802.3ad
Port trunk with LACP
 Spanning tree protocol
 Rapid STP
 QoS:
 Port based / Tag based
 IPv4 ToS/ Ipv4, IPv6 DiffServe
 Port mirroring and bandwidth control
 IEEE 802.1x user authentication
 GVRP
and MVR