beautypg.com

Console management, Connecting to the console port, Login in the console interface – American Fibertek SM9p User Manual

Page 21

background image

13

Console Management

Connecting to the Console Port

Use the supplied RS-232 cable to connect a terminal or PC to the console port. The

terminal or PC to be connected must support the terminal emulation program.

Connecting the switch to a terminal via RS-232 cable

Login in the Console Interface

When the connection between Switch and PC is ready, turn on the PC and run a terminal

emulation program or Hyper Terminal and configure its communication parameters to

match the following default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None

See also other documents in the category American Fibertek Equipment: