American Fibertek SM9p - Manual (Page 47)

39
this command can’t be
applied.
Parameter format:
[yyyymmdd-hh:mm]
sntp daylight-offset
[Minute]
G Set offset of daylight
saving time, if SNTP
function is inactive,
this command can’t be
applied.
switch(config)#sntp
daylight-offset 3
sntp ip
[IP]
G Set SNTP server IP, if
SNTP function is
inactive, this command
can’t be applied.
switch(config)#sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index,
use “show sntp
timzezone” command
to get more
information of index
number
switch(config)#sntp timezone 22
show sntp P Show SNTP
information
switch#show sntp
show sntp timezone P Show index number of
time zone list
switch#show sntp timezone
no sntp G Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight saving
time
switch(config)#no sntp daylight
sntp sync-interval
[64~1024], 0 means
disabled
G Set synchronization
interval
switch(config)#sntp sync-interval
64