American Fibertek SM9p - Manual (Page 149)

141
802.1q VLAN interface
802.1Q Configuration
1. Enable GVRP Protocol: check the check box to enable GVRP protocol.
2. Management VLAN ID: The default value is ‘0’ which means VLAN function in
802.1Q mode is not available. While this column field is filled with a value from 1 to
4096, the member ports of this VLAN can access the management interface.
3.
4. Select the port that wants to configure.
5. Link Type: there are 3 types of link type.
 Access Link: Single switch only, it allows the user to group ports by assigning
the same Untagged VID. While this link type is set, the Untagged VID column