American Fibertek SM9p - Manual (Page 162)

154
QoS Configuration
You can configure Qos policy and priority setting, per port priority setting, COS and TOS
setting.
QoS Policy and Priority Type
 Oos Policy: select the Qos policy rule.
 Using the 8,4,2,1 wnine fair queue scheme: the switch will follow 8:4:2:1 rate
to process priority queue from Hi to lowest queue. For example: the system will
process 8 high queue packets, 4 middle queue packets, 2 low queue packets,
and the one lowest queue packets at the same time.
 Use the strict priority scheme: Always higher queue will be process first,
except higher queue is empty.
 Priority Type: every port has 5 priority type selections. Disable means no priority
type is selected.
 Port-base: the port priority will follow the default port priority that you have
assigned – High, middle, low, or lowest.
 COS only: the port priority will only follow the COS priority that you have
assigned.
 TOS only: the port priority will only follow the TOS priority that you have
assigned.
 COS first: the port priority will follow the COS priority first, and then other priority
rule.
 TOS first: the port priority will follow the TOS priority first, and the other priority
rule.
 Click
Apply .