American Fibertek SM9p - Manual (Page 69)

61
mode, more detail information refers to IEEE 802.3ad.
Aggregator setting
1. System Priority: a value used to identify the active LACP. The switch with the lowest
value has the highest priority and is selected as the active LACP.
2. LACP Configuration: If enable, the group is LACP static trunk group. If disable, the
group is local static trunk group. All ports support LACP dynamic trunk group. If
connecting to the device that also supports LACP, the LACP dynamic trunk group will
be created automatically.
 Trunk Group: there are three-trunk group – trunk 1, 2, and 3. You can select the
trunk group and enable the LACP or disable it.
 Work ports: select a work port number for the trunk group. The LACP static
trunk group work port number cannot be 0.
 Port Configuration: to assign the port to the trunk group.
3. Select the ports to join the trunk group.
4. Select the to save the configuration.
5. You can view the setting information in summary frame.