American Fibertek SM9p - Manual (Page 120)

112
All MAC Address interface
2. The selected port of static MAC address information will display.
3. Select the [Clear MAC Table] to clear the current port static MAC address
information on screen.
Load Factory Default Setting
Reset switch to default configuration.
 Keep current IP address setting?: you can decided to keep the current IP address
or reset to default IP address. Use the Space key to mark the selection.
 Keep current username and password?: you can decided to keep the current
username and password or reset to default username and password. Use the Space
key to mark the selection.
 After the selection, [Execute] to reset.