American Fibertek SM9p - Manual (Page 117)

109
MAC Address Configuration interface
Static MAC Address
You can add a static MAC address; it remains in the switch's address table, regardless of
whether the device is physically connected to the switch. This saves the switch from
having to re-learn a device's MAC address when the disconnected or powered-off device
is active on the network again. You can add / modify / delete a static MAC address.
 Add the Static MAC Address
You can add static MAC address in switch MAC table.
1. MAC Address: Enter the MAC address of the port that should permanently forward
traffic, regardless of the device network activity.
2. Port No.: press “Space” key to select the port number.
3. VID: enter the Mac address’ s VLAD ID, if the Mac address belongs to any VLAN
group.