American Fibertek SM9p - Manual (Page 85)

77
Rapid Spanning Tree interface
RSTP System Configuration
1. You can view spanning tree information about the Root Bridge.
2. You can modify RSTP state. After modification, save the configuration.
 RSTP mode: you must enable or disable RSTP function before configure the
related parameters.
 Priority (0-61440): a value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root. If you change
the value, you must reboot the switch assign path priority number. The value
must be multiple of 4096 according to the protocol standard rule.
 Max Age (6-40): the number of seconds a bridge waits without receiving
Spanning-tree Protocol configuration messages before attempting a
reconfiguration. Enter a value between 6 through 40.