beautypg.com

Annual maintenance procedures, Removing the unit cover – AirSep Eclipse 5 20631679 User Manual

Page 39

background image

Personal Ambulatory Oxygen System Provider Technical Manual

39

PN 20631679 Rev C

ANNuAL MAINTENANCE PROCEDuRES

The following section lists procedures that are necessary to maintain the Eclipse 5. Service should only be performed by a
qualified technician. To perform periodic maintenance, the only tools that should be necessary are:

#1 Phillips Screwdriver

Wire-cutting pliers

Small cable ties

ESD Mat or approved ESD system

Figure 11: Maintenance Tools.

REMOVING THE uNIT COVER

1. Disconnect power supplies and remove Power Cartridge before removing the unit cover.

2. Place the unit horizontally on the front cover.

3. Using a Phillips #1 screwdriver, remove a total of 10 screws (M3x12 Pan Head SEM Screw,

P/N 6974-312-SEQ) from the back of the unit.

• Keep hands out of moving parts
• Disconnect power supplies and remove Power Cartridge before

removing the unit cover.

ESD Safety procedure must be in place.

WARNING: