Ag Leader GeoSteer RTK 4xx MHz Installation Manual - Manual (Page 4)

4 GS-450 Radio Kit Installation Instructions
Overview
The GS-450 Radio Modem provides a RTK radio link between the GeoSteer system on the vehicle and a local Base Station
transmitting on the same frequency. This manual provides the instructions for installing the GS-450 Radio Kit onto the
GeoDock of the GeoSteer system. Follow the instructions provided to install this kit.
Procedure
1. Turn off the GeoSteer system, disconnect the RF cables
from the GeoDock and remove the GeoDock from the
vehicle.
_____________________________________________
Note: The GeoSteer system must always be turned off
before connecting or disconnecting cables.
____________________________________________
2. Remove the black, plastic plug from rear of the GeoDock
assembly with a flat screwdriver.
3. Remove outer steel threaded ring from the RF Radio NMO
10"cable (PN 201-0537-01).
Note: There is an o-ring on the bottom side of the steel
ring. Verify that the o-ring is not lost.