HP Integrity Superdome 2 Server - Manual (Page 87)

Description Column
Enables power sequencing, disables power sequencing,
or does not allow powering on of the device if No Poweron
is selected. Enabled
The amount of delay, in seconds, before the device powers
on. Delay
Device Power Sequence Interconnect Bays tab
Description Column
Bay number of the device Bay
The type of device in the bay or Absent if no device is
installed in the bay Device
Enables power sequencing, disables power sequencing,
or does not allow powering on of the device if No Poweron
is selected. Enabled
The amount of delay, in seconds, before the device powers
on. Possible delay values are 1 to 3600. Delay
Click the Apply button to save the settings.
Date and Time screen
NOTE: The RTC in an nPartition is synced to OA time when the nPartition is rebooted. If you
change the time on the OA, it may affect the RTC on the nPartition.
Static date and time settings
The date and time are static and not updated in real-time. The date and time can only be set when
NTP is disabled.
Description Possible value Box
The date assigned to the enclosure yyyy-mm-dd Date
•
mm is an integer from 1 to 12
•
dd is an integer from 1 to 31
The time assigned to the enclosure hh:mm:ss (24-hour time, ss is optional) Time
• hh is an integer from 0 to 23
•
mm is an integer from 0 to 59
•
ss is an integer from 0 to 59
The time zone assigned to the enclosure Time zone settings Time Zone
• “Africa time zone settings” (page 190)
• “Americas time zone settings” (page 190)
• “Asia time zone settings” (page 192)
• “Universal time zone settings” (page 192)
• “Oceanic time zone settings” (page 193)
• “Europe time zone settings” (page 193)
• “Polar time zone settings” (page 194)
Enclosure settings 87