HP Integrity Superdome 2 Server - Manual (Page 164)

10 Using the CLI
Command line overview
The Onboard Administrator CLI is available from the Onboard Administrator serial port, management
port, or service port and provides access to all Onboard Administrator commands and information.
The CLI user must provide a valid user name/password to log into Onboard Administrator. The
CLI is available for both local user accounts and LDAP users. Two-Factor Authentication is not
available for the CLI.
Access to the Onboard Administrator CLI from either the Onboard Administrator Ethernet
management port or service port requires that Telnet or Secure Shell protocols are enabled on the
Onboard Administrator.
The Onboard Administrator serial port must be used for Onboard Administrator lost password
recovery.
The Onboard Administrator serial port speed is fixed at 9600, N, 8, 1.
For more information about the CLI, see the HP Integrity Superdome 2 Onboard Administrator
Command Line Interface User Guide.
164 Using the CLI