HP Integrity Superdome 2 Server - Manual (Page 112)

Description Item
NOTE: Not applicable for HP Integrity Superdome 2 server blades or storage blades.
Information on this page is current as of the last download. To view updated information, click the
Refresh button.
UID State
The UID State drop-down is used to set the UID light on the blades. Turning on the UID light aids
in locating a specific blade within an enclosure. The UID lights can be turned on or off one at a
time or as groups, depending on the checkboxes.
Virtual Power
NOTE: This menu is not available for HP Integrity Superdome 2 server blades or storage blades.
Description Button
This button mimics a physical momentary press of the power button on the server blade. Clicking
this button powers the server blade on or off gracefully. Momentary Press
This button mimics a physical press and hold of the power button on the server blade. Clicking
this button forces the server blade to shut power off without regard for first shutting down the OS
before turning power off. This option is not available when the server blade is off. Press and Hold
Clicking this button immediately removes power from the system. This option is not available
when the server blade is off. Cold Boot
Clicking this button performs a system reset. This option is not available when the server blade
is off. Reset
One Time Boot
NOTE: This menu is not available for HP Integrity Superdome 2 server blades or storage blades.
Description Option
Forces the server blade to reboot to the diskette drive. Be sure the diskette drive is attached to
the server blade before selecting this option. Diskette Drive (A:)
Forces the server blade to reboot to the CD drive. Be sure the CD drive is attached to the server
blade before selecting this option. CD-ROM
Forces the server blade to reboot to the hard disk. Hard Drive C:
Forces the server blade to boot to the ROM-Based Setup Utility. RBSU
Forces the server blade to boot to PXE NIC. PXE NIC
DVD
NOTE: This menu is not present for HP Integrity Superdome 2 server blades or storage blades.
For connecting the selected blades to the enclosure media, the DVD menu enables you to select
one of the following:
•
Enclosure DVD, if present
•
One of the listed ISO files from an attached USB key
•
None
112 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices