HP Integrity Superdome 2 Server - Manual (Page 34)

IMPORTANT: This menu selection does not set the complex configuration on the Onboard
Administrator. To correctly set up the Door display, you must select the current complex configuration
present in the rack.
Press Next.
Status display preferences
•
Temperature Scale—Select between displaying enclosure temperatures in °C or °F.
•
Display IP Address—Select to enable or disable the display of the IP addresses of the active
Onboard Administrator and the complex service port.
NOTE: The OA IP address does not appear until the setup process is complete.
Press Next to continue.
Two 16s complex setup
If the complex configuration is 2 16s complexes in a Cabinet, unlike the other multi-enclosure
configurations, each enclosure is a self-contained complex and each will require its own login and
password information.
34 HP Superdome 2 Door Status Display