HP Linux Server Management Software - Manual (Page 60)

Toolkit utilities 60
The requested information is returned in the log file, which, in this example, is named log.txt. The contents
of the log file are shown below.
Setting a configuration
A specific configuration can be sent to the iLO, iLO 2, iLO 3, or RILOE II by using the command format:
HPONCFG /f add_user.xml /l log.txt
In this example, the input file has contents:
PASSWORD="floppyshoes">
The specified user will be added to the device.
HPONCFG command-line examples
For HPONCFG command line examples, see the appropriate user guide at the Remote Management website
( http://www.hp.com/servers/lights-out ).
Using HPQLAREP
You must edit the text file to insert the WWID of the boot volume and the LUN number that they will boot from.
The hpqlarep utility discovers the WWID of the HBA in the server blade and writes the information in the text
file. The text file presents the options in human readable format. The hpqlarep utility updates the hardware
with the boot volume WWID and boot LUN read from the text file.
HPQLAREP command-line syntax
hpqlarep /s filename hpqlarep /l filename