Method mode, Controller category, Controller – HP Linux Server Management Software User Manual
Page 44
Toolkit utilities 44
want the data to be deleted. In this mode, ACU does not change an existing option setting unless you
specifically script a different value for that option.
Method mode
The default value for this option is Auto. If you want to use Custom mode, you must specify it.
In Auto mode, ACU can perform an expansion, extension, or migration without user intervention if the values
that you set for other options imply that such an operation is necessary.
Controller category
The Controller category has the following options:
•
•
•
ClearConfigurationWithDataLoss (on page
•
DeleteLicenseKey ("
" on page
•
DPOEnable ("
" on page
•
ElevatorSortEnable ("
" on page
•
ExpandPriority ("
RebuildPriority, ExpandPriority
" on page
•
IRPEnable ("
" on page
•
LicenseKey ("
" on page
•
MNPDelay ("
" on page
•
•
QueueDepth ("
" on page
•
ReadCache ("
" on page
•
RebuildPriority ("
RebuildPriority, ExpandPriority
" on page
•
•
•
WriteCache ("
" on page
Controller
You must enter a value for this option because it identifies the controller that you want to configure:
•
All—Configure all detected controllers in the system.
•
Slot [N][:M]—Configure the internal controller in slot number N, or the external controller at port
M in slot N.
•
WWN [N]—Configure the external controller that has the World Wide Name N.
•
SerialNumber [N]—Configure the shared storage controller that has serial number N.
•
IOCabinet[N],IOBay[N],IOChassis[N],Slot[N],Cabinet[N],Cell[N]—Configure
the controller in the Integrity server that has the slot path information defined by this sequence of
identifiers.