HP Surestore 2.15 Tape Library - Manual (Page 87)

4-37
Library Operation
Clearing a Drive Cleaning Error
L
ib
r
ar
y
O
p
er
at
io
n
Clearing a Drive Cleaning Error
1 2 ➞ ADMIN* ➞ PSWD 000 000 000 ➞ ONLINE REPAIR
CAUTION Using this option causes the library drive mechanism(s) to become inactive.
To use this option to clear a drive cleaning error:
1. With CLEAN DRV # displayed, press CANCEL until the drive status
displays. (# is the drive number containing the damaged tape.)
2. Press NEXT until ADMIN* displays, then press ENTER .
3. Enter the three-part numerical password (see “Entering the
Administration Menu Password” on page 4-7).
4. INFO* displays. Press NEXT or PREV until ONLINE REPAIR* displays,
then press ENTER . DRIVE POWER* displays.
5. Press NEXT or PREV until DRIVE STATUS displays, then press ENTER . DRV
1 ON GOOD displays.
• If the damaged tape is in drive 1, press ENTER .
• If the damaged tape is in drive 2, press NEXT until DRV 2 ON GOOD
displays, then press ENTER .
DRV # ON GOOD displays, where “#” is the drive number and ON GOOD
is flashing.
6. Press NEXT until DRV # OFF FAILED displays then press ENTER .
7. CHANGE CONFIRMED displays briefly, then ONLINE REPAIR*
displays. Press ENTER .
8. DRIVE POWER* displays.
9. Press NEXT or PREV until DRIVE STATUS displays, then press ENTER .
10. Press NEXT or PREV until DRV # OFF FAILED displays (where “#” is the
number of the drive that was just taken offline) then press ENTER .
11. DRV # OFF FAILED displays, where “#” is the drive number and “OFF
FAILED” is flashing.
12. Press NEXT until DRV # ON GOOD displays, then press ENTER .