HP Surestore 2.15 Tape Library - Manual (Page 46)

3-4
Tape Cartridges
Labeling Tape Cartridges
Labeling Tape Cartridges
Make it a practice to use bar code labels on your tape cartridges. Your host
software may need to keep track of the following information and the
associated bar code:
• date of format or initialization
• cartridge owner (such as group or department)
• storage purpose (such as backup, old version of operating system)
If the host software does not keep track of this information, create a method
of doing so.
Slide the label into the slot on the face of the cartridge as illustrated in
Figure 3-1.
NOTE If bar code labels are not used and the Barcode On/Off configuration is set to
On, the Inventory Check test performance can be significantly affected. This
test runs when the library is powered on and whenever the front access door
is used.
Figure 3-1 Proper Label Position