HP Surestore 2.15 Tape Library - Manual (Page 70)

4-20
Library Operation
Viewing Cartridge Bar Code Labels
Viewing Cartridge Bar Code Labels
Bar code label information can be viewed for each tape cartridge in the
library using the control panel. Bar code information displays sequentially by
storage slot number.
To view bar code information:
1. Verify that the drive status displays (if not, press CANCEL until it does).
2. Press NEXT until VIEW BAR CODES* displays, then press ENTER .
###### SLOT # displays. (“######” represents the bar code
information, and “#” represents the first storage slot that contains a bar
coded tape cartridge.)
NOTE If there are no bar coded tape cartridges in the library, LIBRARY EMPTY
displays briefly, then VIEW BAR CODES* displays. Press CANCEL to return to
the drive status indicators (“ready” state).
3. Press NEXT or PREV to scroll through the storage slot locations that
contain bar coded tape cartridges.
4. Press CANCEL twice to return to the drive status indicators (“ready” state).