HP Surestore 2.15 Tape Library - Manual (Page 77)

4-27
Library Operation
Retrieving Performance Information
L
ib
r
ar
y
O
p
er
at
io
n
Retrieving Performance Information
1 2 ➞ ADMIN* ➞ PSWD 000 000 000 ➞ INFO*
Use the INFO* option to dDisplay information about the operations of the
library. This information is called a log.
To access an information log:
1. Verify that the drive status displays (if not, press CANCEL until it does).
2. Press NEXT until ADMIN* displays, then press ENTER .
3. Enter the three-part numerical password (see “Entering the
Administration Menu Password” on page 4-7).
4. INFO* displays. Press ENTER .
5. Press NEXT until the name of the log to access displays, then press ENTER .
An asterisk (*) indicates that there are more choices beneath the
displayed choice.
6. Press CANCEL to return to the drive status (“ready” state).
Table 4-6 Information Logs
Problem Solution
REVISION Library firmware revision number.
LIB ODOMETERS *
Press ENTER to select
the odometer logs.
HOURS # Number of operation hours (time during
which power was on). Some time may have
been spent in power reduction mode.
MOVES # Total number of moves and move attempts by
the cartridge transport mechanism.
XLATES # Total number of cartridge transport
mechanism horizontal moves.
DRIVE LOADS * DRIVE 1 Number of tape cartridge loads for drive 1.
DRIVE 2 Number of tape cartridge loads for drive 2
(two drive library only).