HP StorageWorks XP Remote Web Console Software - Manual (Page 62)

Figure 15 Create V-VOL wizard pane (2)
• V-VOL Group: V-VOL group ID.
• V-VOL information setting list (upper-right area of pane): Information about the V-VOLs you are
creating.
• No.: Number
• Emulation: V-VOL's emulation type
• Capacity: V-VOL's capacity
• CU:LDEV: V-VOL's CU and LDEV numbers
• Select LDEV No.: Settings of LDEV numbers for the CU number selected in Select CU No. Numbers
in the upper end and left side indicate the LDEV number. For example, the LDEV number of the
cell whose upper end is +2 and the left side is +10 is 12.
Gray cells indicate LDEV numbers that are already used for other volumes, white cells indicate
unused LDEV numbers, and blue cells indicate LDEV numbers selected for V-VOLs in this pane.
• Select CU No.: CU number.
• Interval: Interval between LDEV numbers to be assigned to newly created V-VOLs. If you select 0,
LDEV numbers are sequential.
NOTE:
• The value you specify as the interval between LDEV numbers counts only available LDEV
numbers and skips those that are not selectable.
• Even when you use multiple CUs, LDEV numbers are assigned according to the setting in the
Interval list.
• CU number of another SLPR is used.: Used to select the CU numbers of an SLPR other than the
SLPR you are now in.
• Back button: Returns to the Create V-VOL wizard pane (1) while maintaining settings in this pane.
• Next button: Fixes the setting in this pane, and displays the Create V-VOL wizard pane (3).
XP Snapshot operations 62