HP ProLiant DL380 G3 Server - Manual (Page 91)

Hardware Options Installation 91
8. Slide the power supply into the power supply bay.
9. Connect the DC power cord to the power supply.
10. Lock the cable management arm into the operating position.
11. Power up the server if it was previously powered down ("Powering Up the
Server" on page 37).
12. Be sure that the power supply LED is green ("Rear Panel LEDs and Buttons"
on page 15).
13. Be sure that the front panel external health LED is green ("Front Panel LEDs
and Buttons" on page 11).
Expansion Board Options
The server supports PCI and PCI-X expansion boards.
IMPORTANT: The optional RILOE II board can be installed only in
slot 1. If you plan to install a RILOE II board in the future, leave slot 1
unpopulated.
Removing Expansion Slot Cover 1
1. Power down the server ("Powering Down the Server" on page 37).
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM