HP ProLiant DL380 G3 Server - Manual (Page 18)

18 HP ProLiant DL380 Generation 3 Server User Guide
System Maintenance Switch
Position Default Function
S1 Off Off = iLO security is enabled.
On = iLO security is disabled.
S2 Off Off = System configuration can be
changed.
On = System configuration is
locked.
S3 Off Reserved
S4 Off Off = Booting from diskette is
controlled by RBSU.
On = Booting from diskette is
enabled and RBSU is overridden.
S5 Off Off = Power-on password is
enabled.
On = Power-on password is
disabled.
S6 Off Off = No function
On = Clear NVRAM.*
* If you clear NVRAM, you must re-enter the server serial number
through RBSU ("Re-Entering the Server Serial Number" on page
118).
NMI Switch
The NMI switch allows administrators to perform a memory dump before
performing a hard reset. Crash dump analysis is an essential part of eliminating
reliability problems, such as hangs or crashes in operating systems, device
drivers, and applications. Many crashes freeze a system, requiring you to do a
hard reset. Resetting the system erases any information that would support root
cause analysis.
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM