HP ProLiant DL380 G3 Server - Manual (Page 60)

60 HP ProLiant DL380 Generation 3 Server User Guide
a. Secure the power cord anchor to the server, and then insert the tie wrap
into the groove on the power cord anchor.
NOTE: Peripheral device cables are removed for clarity.
b. Place the power cord across the tie wrap at the following locations:
21.59 cm (8.5 inches) from the end of the redundant power supply cord
27.94 cm (11 inches) from the end of the primary power supply cord
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM